1. Under the action of the centrifugal force generated by the high-speed rotating rotor, the material is simultaneously sucked into the working cavity from the upper and lower feeding areas of the working head from the axial direction. 2. The strong centrifugal force throws the material from the radial direction into the narrow and precise gap between the stator and the rotor. At the same time, the materials are initially dispersed and emulsified by centrifugal extrusion, impact and other forces. 3. At the outer end of the high-speed rotating rotor, a linear velocity of at least 15m/s is generated, and the maximum can reach 40m/s, and it forms strong mechanical and shear, friction, impact and tear, so that the material is fully dispersed, emulsified, and uniform. Mass, broken, and ejected through the stator slot at the same time. 4. The material is continuously ejected from the radial direction at a high speed, and the flow direction is changed under the resistance of the material itself and the container wall. At the same time, under the action of the upper and lower axial suction force generated by the rotor area, the upper and lower two strands are formed. Strong turning turbulence. The materials go through several cycles and finally complete the process of dispersion, emulsification and homogenization