Products

Your present location:首页ProductsMillSuperpower horizontal sand mill > SWKS Superpower horizontal sand mill/bead mill
Product introduction
Advantages:
High efficiency, Strong continuity of work
Shell, end face and main shaft are all equipped with cooling system

Operating Principle:
The agitator shaft activates the grinding media with high intensity through the whole grinding chamber. The highly efficient devices are suitable for product separation and grinding media, which ensures that the mill also has the capability of operating high viscous materials.
 
Characteristics

1. High efficiency, strong operability.
2. Grinding efficiency depends on the structure of dispersion disc. Compared with similar products, the structure of our dispersion disc is designed to contact more with zirconia beads, producing larger force and achieving better effect.
3. The series is superior in safety performance to other pin sand mill.
4. Clearance between disc and chamber is 15mm. After the mill has been used for a period of time, when the contact part between disc and chamber gets worn, the service life of chamber can be prolonged by adjusting the position of dispersion disc or cutting off a small portion of dispersion disc rim.
5. The shell and end face are equipped with cooling system that can help cooling materials.
6. With pressure protection, which can be adjusted according to the material viscosity.
7. Imported zirconia beads ensure excellent grinding effect.
8. Grinding medium: highly wear-resistant zirconia beads.
9. With CE and ISO 9001:2000 qualifications.

1. Power: 90kW three phase asynchronous motor
2. Voltage: 380V, 3P, 50HZ
3. Speed: 0~1000rpm (Frequency control)
4. Mechanical seal: imported container type double mechanical seal (Ingersoll-Rand)
5. Drum and pin: Special high abrasion resistant material, no wear nor rust, non discoloring for milling, pollution free, adjustable milling chamber volume
6. Separating grid: of special highly wear-resistant material. Space between the grids can be adjusted according to the grinding bead sizes. A protector is available to prevent the blocking of the beads
7. Cooling system: All of the shell, end face and main shaft are equipped with cooling system with good performance. The material temperature can be held within 45℃(through chilling water of 10℃)
8. Cooling water consumption: 3-4m³/h
9. Suitable viscosity: below 20,000cps
10. Working efficiency: fineness below 5μm
11. Processing volume: 1000-2500L/h
12. Grinding medium: highly wear-resistant zirconia beads

Other products you attention:

  Products

 

Site search

Room 2901BM InterContinental Business Center, No. 500 Hengfeng Road, Shanghai, China

 

Phone:+86 021 63171155

Fax:+86 021 63178868

All Rights Reserved Copyright Sower dimensional mechanical and electrical equipment co., 沪ICP备05009800号  Site map | link | Legal notices | Contact us