All Rights Reserved Copyright Sower dimensional mechanical and electrical equipment co., ICP:05009800
Products
Room 2901,BM InterContinental Business Center, No. 500 HengfengRoad, Shanghai, China
Phone:+86 021 63171155
Fax:+86 021 63178868
Site search
Product introduction
2L Laboratory planetary agitator
Structure type:
1. Electric lifting bucket type
2. Single dispersing axle + single stirring axle + scraping wall.
Rotary stirring system:
1. Power of revolution/stirring motor: 0.75kw /4P; Matching cycloid gear reducer, frequency converter
2. Planetary revolution speed: 0~52rpm, adjustable.
3. Mixing shaft/mixing slurry speed: 0~78pm, adjustable.
4. Selection of mixing slurry: spiral twist type (customized according to material characteristics), SUS304 material; Quantity: 2
5. Wall scraper: quantity: 1 set; Scraping wall material: SUS304 and Teflon; Consistent with the speed of revolution
Autobiography decentralized system:
1. 0.75kw /2P dispersion motor and frequency converter:
2. Dispersion speed (rotation) : speed: 0~ 2,650 RPM, adjustable
3. One dispersing shaft and two dispersing disks shall be installed to ensure better dispersing/stirring
4, scattered disk Φ 38 mm in diameter, Material SUS304 stainless steel
Stirring volume:
1. Design volume of stirring barrel: 3.6l; Effective volume: 2L;
2. Inner bladder material: SUS304;
3. The upper flange plane of the stirring barrel and the upper barrel body are sealed through the sealing ring;
4. A pair of lifting hands.
5. Double layer with insulation layer, the charged heating rod inside the jacket can heat the material
6. Within the clip, the coil tube can be connected with the cooling medium for material cooling (this function can be selected according to the customer's requirements)
7, on the barrel on match Φ 40 powder/liquid feed hopper, a, can quickly switch; 1 spotlights; With 2 small Windows (one spotlights and one viewport), and other necessary nozzles
Electronic control system:
Power distribution cabinet: frequency control, temperature display (control), spotlights, lifting, emergency stop and other functions of the equipment are displayed and operated on the power distribution cabinet.
Positioning system:
1. With positioning adjusting device and locking device, the stirring barrel and upper barrel can be accurately positioned and rotation can be prevented.
2. The positioning stop of the flange under the upper barrel body should be precisely matched with the mixing tank to ensure the reasonable position of the mixing tank and accurate positioning.
Vacuum system:
1. Equipped with vacuum pump and buffer tank, and mechanical seal, vacuum the cylinder